3.5. Gradient

This tool fills the selected area with a gradient from the foreground and background colors by default, but there are many options. To make a gradient, drag the cursor in the direction you want the gradient to go and you release the mouse button when you feel you have the right position and size of your gradient. The softness of the gradient depends on how far you drag the cursor. The shorter the drag distance, the sharper it will be.

In former GIMP versions, you had to use the gradient editor to modify the gradient. With GIMP-2.10, this gradient editor still exists, but you can now edit it more easily directly on canvas.

If you click and drag outside the selection, only a part of the gradient will appear in the selection.

There are an astonishing number of things you can do with this tool, and the possibilities may seem a bit overwhelming at first. The two most important options you have are the Gradient and the Shape. Clicking the Gradient button in the tool options brings up a Gradient Select window, allowing you to choose from among a variety of gradients supplied with GIMP; you can also construct and save custom gradients. Further information about gradients can be found in Paragraaf 10, “Kleurverlopen” and Paragraaf 3.4, “Gradients Dialog”.

For Shape, there are 11 options: Linear, Bilinear, Radial, Square, Conical (symmetric), Conical (asymmetric), Shaped (angular), Shaped (spherical), Shaped (dimpled), Spiral (clockwise), and Spiral (counterclockwise); these are described in detail below. The Shaped options are the most interesting: they cause the gradient to follow the shape of the selection boundary, no matter how twisty it is. Unlike the other shapes, Shaped gradients are not affected by the length or direction of the line you draw: for them as well as every other type of gradient you are required to click inside the selection and move the mouse, but a Shaped appears the same no matter where you click or how you move.

[Tip] Tip

Check out the Difference option in the Mode menu, where doing the same thing (even with full opacity) will result in fantastic swirling patterns, changing and adding every time you drag the cursor.

3.5.1. Activating the Tool

There are different possibilities to activate the tool:

  • From the image-menu: ToolsPaint ToolsBlend.

  • By clicking the tool icon .

  • By clicking on the L keyboard shortcut.

3.5.2. Opties

Figuur 14.66. The Gradient tool dialog

The Gradient tool dialog

Normally, tool options are displayed in a window attached under the Toolbox as soon as you activate a tool. If they are not, you can access them from the image menu bar through WindowsDockable WindowsTool Options which opens the option window of the selected tool.

Mode; Opacity
See the Common Paint Tool Options for a description of tool options that apply to many or all paint tools.
Gradient

A variety of gradient patterns can be selected from the drop-down list. The tool causes a shading pattern that transitions from foreground to background color or introduces others colors, in the direction the user determines by drawing a line in the image. For the purposes of drawing the gradient, clicking on the Reverse reverses the gradient direction with the effect, for instance, of swapping the foreground and background colors.

On the right hand, a button to open the Gradient Editor dialog.

Vorm

The GIMP provides 11 shapes, which can be selected from the drop-down list. Details on each of the shapes are given below.

Figuur 14.67. Examples of gradient shapes

Examples of gradient shapes

Lineair

Examples of gradient shapes

Bi-Linear

Examples of gradient shapes

Radiaal


Lineair

This gradient begins with the foreground color at the starting point of the drawn line and transitions linearly to the background color at the ending point.

Bi-Linear

This shape proceeds in both directions from the starting point, for a distance determined by the length of the drawn line. It is useful, for example, for giving the appearance of a cylinder.

Radiaal

This gradient gives a circle, with foreground color at the center and background color outside the circle. It gives the appearance of a sphere without directional lighting.

Square; Shaped

Figuur 14.68. Square-shaped gradient examples

Square-shaped gradient examples

Vierkant

Square-shaped gradient examples

Naar vorm (hoekig)

Square-shaped gradient examples

Naar vorm (rond)

Square-shaped gradient examples

Naar vorm (putjes)


There are four shapes that are some variant on a square: Square, Shaped (angular), Shaped (spherical), and Shaped (dimpled). They all put the foreground color at the center of a square, whose center is at the start of the drawn line, and whose half-diagonal is the length of the drawn line. The four options provide a variety in the manner in which the gradient is calculated; experimentation is the best means of seeing the differences.

Conical (symmetric); Conical (asymmetric)

Figuur 14.69. Conical gradient examples

Conical gradient examples

Conical (symmetrical)

Conical gradient examples

Conical (asymmetrical)


The Conical (symmetrical) shape gives the sensation of looking down at the tip of a cone, which appears to be illuminated with the background color from a direction determined by the direction of the drawn line.

Conical (asymmetric) is similar to Conical (symmetric) except that the "cone" appears to have a ridge where the line is drawn.

Spiral (clockwise); Spiral (counterclockwise)

Figuur 14.70. Spiral gradient examples

Spiral gradient examples

Spiral (clockwise)

Spiral gradient examples

Spiral (counterclockwise)


The Spiral shape provide spirals whose repeat width is determined by the length of the drawn line.

Repeat
  • None as default.

  • Sawtooth Wave: the Sawtooth pattern is achieved by beginning with the foreground, transitioning to the background, then starting over with the foreground.

  • Triangular Wave: starts with the foreground, transitions to the background, then transitions back to the foreground.

  • Truncate: areas before and after endpoints are truncated.

Kleurbenadering

Dithering is fully explained in the Glossary

Adaptive Supersampling

This a more sophisticated means of smoothing the "jagged" effect of a sharp transition of color along a slanted or curved line. Only tests can allow you to choose.

Verschuiven

The Offset value permits to increase the slope of the gradient. It determines how far from the clicked starting point the gradient will begin. Shaped forms are not affected by this option.

Figuur 14.71. Blend tool: Offset example

Blend tool: Offset example

Top, Offset = 0 ; Bottom, Offset = 50%


Instant mode

When this option is checked, gradient tool works as in GIMP-2.8 : the gradient line disappears as soon as you release the mouse button. The option must be activated (with Shift also) before starting drawing gradient.

Modify active gradient

When this option is checked, gradient tool works as in GIMP-2.8 : the custom gradient is not created automatically and must be created manually. The option can be activated before starting drawing gradient or if the active gradient is not the custom gradient.

3.5.3. Editing Gradient

Important change with GIMP-2.10 in editing gradient:

On-canvas editing

All the old Gradient Editor dialog features are now available directly on canvas. You can create and delete color stops, select and shift them, assign colors to color stops, change blending and coloring for segments between color stops, create color stops from midpoints.

Select a gradient in the gradient dialog. Click and drag on canvas. A line is drawn and the gradient is displayed. You can edit this gradient by moving the mouse pointer on this line. As soon as you try to edit gradient, GIMP-2.10 creates a custom gradient, which is a copy of the selected gradient. It becomes the active gradient and will be preserved across sessions. Here, we use the Abstract3 gradient.

The Abstract3 gradient, with endpoints

At both ends of the line, you can see a Start endpoint and an End endpoint. Click and drag an endpoint (the mouse pointer is accompanied with a moving cross) to move it where you want on your screen. A small window appears showing data about the selected endpoint : the position of the mouse (coordinate origin is the upper left corner of image or selection), the starting (left) and the ending (right) color of the gradient.

End point moved

[Opmerking] Opmerking

In you only move endpoints, the custom gradient is not created yet.

On the line, you can see several small squares. These are Stops that divide gradient into segments. You can edit segments separately. Click and drag stops to move them (the active endpoint takes a yellow color). As soon as you move a stop, the custom gradient is created. The small data window shows a button that allow you to remove the active stop.

Stop point moved and data window

If you move the mouse pointer on the line, a Midpoint shows up. Then, the small data window has two buttons : to create a new stop at midpoint, and to center midpoint.

Changing color: in stop and end data windows, you have color dwells with a drop-down list. The default option is Fixed; this means that color choice will be independent from foreground and background colors. Click on a color dwell to open a color selector.

Toetsencombinaties (Standaard instellingen)

Ctrl is used to create straight lines that are constrained to 15 degree absolute angles.

Alt or Ctrl+Alt to move the whole line.

The Gradient Editor

The Gradient Editor still exists: Paragraaf 3.4.3, “The Gradient Editor”.