A “path” icon tells us whether editing the current path is locked (disabled) or not. Clicking the icon toggles between enabled and disabled.

	Bemærk
	Until GIMP 2.10.32 this was called Lock Path Strokes. That name was considered ambiguous, because the term strokes is also used for stroking lines along a path, which this option does not change.

A “cross with arrows” icon tells us whether the current path position is locked (disabled) or not. When the path position is locked, the path can't be moved. Clicking the icon toggles between enabled and disabled.

An “open eye” icon if the path is visible, or a blank space if it is not. “Visible” means that a trace of the path is drawn on the image display. The path is not actually shown in the image pixel data unless it has been stroked or otherwise rendered. Clicking in the eye-symbol-space toggles the visibility of the path.

A “chain” symbol is shown to the right of the eye-symbol-space if the path is transform-locked, or a blank space if it is not. “Transform-locked” means that it forms part of a set of elements (layers, channels, etc) that are all affected in the same way by transformations (scaling, rotation, etc) applied to any one of them. Clicking in the chain-symbol-space toggles the transform-lock status of the path.

A small preview-icon showing a sketch of the path. If you click on the icon and drag it into an image, this will create a copy of the path in that image.

The name of the path, which must be unique within the image. Double-clicking on the name will allow you to edit it. If the name you create already exists, a number will be appended (e.g., “#1”) to make it unique.

See New Path. Holding down Shift makes a new (empty) path with the last used values, without opening the New Path dialog.

See Raise Path. Holding down Shift moves the path to the top of the list.

See Lower Path. Holding down Shift moves the path to the bottom of the list.

See Duplicate Path.

Converts the path into a selection; see Path to Selection for a full explanation. You can use modifier keys to set the way the new selection interacts with the existing selection:

Holding down Shift brings up the Advanced Options dialog, which probably is only useful to GIMP developers.

See Stroke Path. Holding down Shift strokes the path based on the last used values without opening the Stroke Path dialog.

Delete Path deletes the currently selected path.

Edit Path is an alternative way to activate the Paths tool, used for creating and manipulating paths. It can also be activated from the Toolbox, or by using the keyboard shortcut B.

Edit Path Attributes brings up a small dialog that allows you to change the name of the path. You can also do this by double-clicking on the name in the list in the Paths dialog.

Color Tag brings up a sub menu, similar to the one in the Layers Dialog, that allows you to select a color tag for the selected path.

New Pathcreates a new path, adds it to the list in the Paths dialog, and makes it the active path for the image. It brings up a dialog that allows you to give a name to the path. The new path is created with no anchor points, so you will need to use the Path tool to give it some before you can use it for anything.

Raise Path moves the path one slot higher in the list in the Paths dialog. The position of a path in the list has no functional significance, so this is simply a convenience to help you keep things organized.

Lower Pathmoves the path one slot lower in the list in the Paths dialog. The position of a path in the list has no functional significance, so this is simply a convenience to help you keep things organized.

Duplicate Path creates a copy of the active path, assigns it a unique name, adds it to the list in the Paths dialog, and makes it the active path for the image. The copy will be visible only if the original path was visible.

Delete Path deletes the current selected path.

Merge Visible Paths takes all the paths in the image that are visible (that is, all that show “open eye” symbols in the Paths dialog), and turns them into components of a single path. This may be convenient if you want to stroke them all in the same way, etc.

These commands all convert the active path into a selection, and then combine it with the existing selection in the specified ways. (Path to Selection discards the existing selection and replaces it with one formed from the path.) If necessary, any unclosed components of the path are closed by connecting the last anchor point to the first anchor point with a straight line. The “marching ants” for the resulting selection should closely follow the path, but don't expect the correspondence to be perfect.

This operation can be accessed in several ways:

Selection to Path creates a new path from the image's selection. In most cases the resulting path will closely follow the “marching ants” of the selection, but the correspondence will not usually be perfect.

Converting a two-dimensional selection mask into a one-dimensional path involves some rather tricky algorithms: you can alter the way it is done using the Advanced Options, which are accessed by holding down the Shift key while pressing the Selection to Path button at the bottom of the Paths dialog. This brings up the Advanced Options dialog, which allows you to set 20 different options and variables, all with cryptic names. The Advanced Options are really intended for developers only, and help with them goes beyond the scope of this documentation. Generally speaking, Selection to Path will do what you expect it to, and you don't need to worry about how it is done (unless you want to).

This operation can be accessed in several ways:

Fill Path fills all areas delimited by the path with the current foreground color or currently selected pattern. See the section about Fill Path for more information.

This operation can be accessed in several ways:

Stroke Path renders the active path on the active layer of the image, permitting a wide variety of line styles and stroking options. See the sections about Stroke Path and Stroking for more information.

Copy Path copies the active path to the Paths Clipboard, enabling you to paste it into a different image.

	Vink
	You can also copy and paste a path by dragging its icon from the Paths dialog into the target image's display.

	Bemærk
	When you copy a path to an image, it is not visible. You have to make it visible in the Paths dialog.

Paste Path creates a new path from the contents of the Path Clipboard, adds it to the list in the Paths dialog, and makes it the active path for the image. If no path has previously been copied into the clipboard, the menu entry will be insensitive.

Export Path allows you to save a path to a file: it pops up a file save dialog that allows you to specify the file name and location. You can later add this path to any GIMP image using the Import Path command. The format used for saving paths is SVG: this means that vector-graphics programs such as Sodipodi or Inkscape will also be able to import the paths you save. See the Paths section for more information on SVG files and how they relate to GIMP paths.

Import Path creates a new path from an SVG file: it pops up a file chooser dialog that allows you to navigate to the file. See the Paths section for information on SVG files and how they relate to GIMP paths.